Dr. Ankit Sharma
Assistant Professor

Publications

1. Ankit Sharma*, et al., (2019) Comparative Analysis of Chipping mechanics of Float glass during Rotary Ultrasonic Drilling and Conventional Drilling: For multi-shaped tools, Machining Science and Technology, 23 (4), 547-568. (Impact Factor: 2.154)
2. Ankit Sharma*, et al., (2019) Multi-Shaped Tool Wear Study during Rotary Ultrasonic Drilling and Conventional Drilling for Amorphous Solid, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering,233(3): 551-560. (Impact Factor: 1.822)
3. Ankit Sharma*, et al., (2021) Effect of Pre and Post Tempering on Hole Quality of Float Glass Specimen: for Rotary Ultrasonic and Conventional Drilling. Silicon. 13, 2029–2039. (Impact Factor: 2.941)
4. Ankit Sharma*, et al., (2021) Experimental Investigation and Optimization of Electric
   Discharge Machining Process Parameters Using Grey-Fuzzy-Based Hybrid Techniques. (Impact Factor: 3.748)
5. Ankit Sharma*, et al., (2021) Investigation of Functionally Graded Adherends on Failure of Socket Joint of FRP Composite tubes. (Impact Factor: 3.748)
6. Ankit Sharma*, et al., (2018) Characterization of Chipping and Tool wear during drilling of Float glass using rotary ultrasonic machining, Measurement, 128, 254-263. (Impact Factor: 5.131)
7. Ankit Sharma*, et al., (2021) Mathematical Approach on Chipping Volume Estimation Generated During Rotary Ultrasonic Drilling for Float Glass, Proceedings of the National Academy of Sciences, India Section A: Physical Sciences, 26 (1), 1-7. (Impact Factor: 1.291)
8. Manpreet Singh, Ankit Sharma*, Sumit Kanchan, Sumeet Sharma (2014) Analytical study of exhaust pollutants, fuel consumption and available fuel consumption reduction technologies for petrol and diesel vehicles–a reviewInternational Journal of Mechanical Engineering & Technology (IJMET), 5(9), 347-360.
9. M Kumar, A Babbar, Ankit Sharma, AS Shahi (2020) Effect of post weld thermal aging (PWTA) sensitization on micro-hardness and corrosion behavior of AISI 304 weld joints, Journal of Physics: Conference Series, 1240 (1), 012078.
10. Ankit Sharma*, Manpreet Singh, Influence of Fuel Consumption and Instantaneous Exhaust Pollutants on Euro 4 Gasoline Vehicles at Traffic Signalized Intersections: Idling and Start/Restart Manoeuvre, International Journal of Vehicle Structures & Systems (IJVSS) 9 (1), 27-31.
11. Singh, Ankit Sharma*, A Agnihotri, P K Dey, D. Kalita, S.S. Dutta (2015). An Investigation Study Based on Emerging Demand of Electric Unicycle Vehicles, A. Microcontroller, 5 (5), pp. 1-6.
12. Manpreet Singh, Ankit Sharma*& Vivek Jain (2015) Instantaneous Exhaust Emissions and Fuel Consumption in Gasoline Vehicles: Testing and Empirical Analysis, International Journal of Vehicle Structures & Systems 7 (1), 47.
13. Ankit Sharma*, Manpreet Singh, S Sharma, Parametric analysis of an air driven engine: A critical review, (2015) International Journal of Advanced Research In Engineering And Technology, 6(4), 123-131.
14. Ankit Sharma*, Vivek Jain (2019), Experimental investigation of cutting temperature during drilling of float glass specimen, IOP Conference Series: Materials Science and Engineering, 715 (1), 012050.
15. Atul Babbar, Ankit Sharma*, Sandeep Bansal, Jonty Mago, Varinder Toor (2020) Potential applications of three-dimensional printing for anatomical simulations and surgical planning, Materials Today: Proceedings, 220 (33), 1558-1561.
16. Ankit Sharma*, et al., (2020) A Novel investigation study on float glass hole surface integrity & tool wear using Chemical assisted Rotary ultrasonic machining, Materials Today: Proceedings, 26, 632-637.
17. Priya Khanduja, Harshita Bhargave, Atul Babbar, Pankaj Pundirand Ankit Sharma* (2021), Development of two-dimensional plotter using programmable logic controller and human machine interface, Journal of Physics, 1950,
18. Atul Babbar, A. Rai, Ankit Sharma* (2021) Latest trend in building construction: three-dimensional printing, Journal of Physics, 1950, 012007.
19. Ankit Sharma*, et al., (2022) Machining of hard and brittle materials: A comprehensive review, Materials Today: Proceedings, 50(5), 1048-1052.
20. Ankit Sharma*, et al., (2018) Enhancement of surface roughness during pre-tempered float glass hole drilling by Rotary Ultrasonic machining, MATEC Web of Conferences 249, 01006.
21. Ankit Sharma*, et al., (2018) Tool wear analysis while creating blind holes on float glass using conventional drilling: A multi-shaped tools study, Advances in Manufacturing Processes. Lecture Notes in Mechanical Engineering. Springer, pp 175-183.
22. Ankit Sharma*, et al., (2019) Influence of Cutting Force and Drilling Temperature on Glass Hole Surface Integrity During Rotary Ultrasonic Drilling, Lecture Notes in Mechanical Engineering. Advances in Production and Industrial Engineering,pp 369–378.
23. Mohit Kumar, Ankit Sharma*, A. S. Shahi, (2018) A Sensitization studies on the Metallurgical and Corrosion behavior of AISI 304 SS welds, Advances in Manufacturing Processes. Lecture Notes in Mechanical Engineering. Springer, pp 257-265.
24. Atul Babbar, Ankit Sharma*, P. Singh, (2021) Multi-objective optimization of magnetic abrasive finishing using grey relational analysis, Materials Today: Proceedings, 50, pp. 570–575
25. Gaurav Kalia, Ankit Sharma*, Atul Babbar, (2022) Use of three-dimensional printing techniques for developing biodegradable applications: A review investigation, Materials Today: Proceedings. 62(1), pp. 346-352. https://doi.org/10.1016/j.matpr.2022.03.445
26. Ankit Sharma*, Aryan Rai, (2022) Fused deposition Modelling (FDM) based 3D & 4D Printing: A State of art review, Materials Today: Proceedings. 62(1), 367-372https://doi.org/10.1016/j.matpr.2022.03.679
27. Ankit Sharma*, et al., Machining of ceramic materials: a state-of-the-art review, International Journal on Interactive Design and Manufacturing, August 2022. https://doi.org/10.1007/s12008-022-01016-7(Impact Factor: 1.499). *Corresponding author, ^#Equal contribution

Books Edited

1. Atul Babbar, Ankit Sharma*^#,Vivek Jain, Dheeraj Gupta (2021) Additive Manufacturing Processes in Biomedical Engineering: Advanced Fabrication Methods and Rapid Tooling Techniques, will bepublished by CRC Press, Taylor and Francis (Scopus & Web of Science Indexed Book), ISBN-978-1-032-10972-5. Link: https://doi.org/10.1201/9781003217961
2. Atul Babbar, Ranvijay Kumar, Vikas Dhawan, Nishant Ranjan, Ankit Sharma*^#,(2021) Additive Manufacturing of Polymers for Tissue Engineering: Fundamentals, Applications, and Future Advancements, will bepublished by CRC Press, Taylor and Francis (Scopus & Web of Science Indexed Book), ISBN- 978-1-032-21042-1. Link: https://www.routledge.com/Additive-Manufacturing-of-Polymers-for-Tissue-Engineering-Fundamentals/Babbar-Kumar-Dhawan-Ranjan-Sharma/p/book/9781032210421
3. Ankit Sharma*^#,Amrinder Singh Uppal, Bhargav Prajwal Pathri, Atul Babbar, Chander Prakash, (2022) Modern Hybrid Machining and Super Finishing Processes: Technology and Applications, will bepublished by CRC Press, Taylor and Francis (Scopus & Web of Science Indexed Book), ISBN- 978-1-032-21042-1. 9 (in progress). *Corresponding author, ^#Equal contribution

Book Chapter Published

1. Ankit Sharma*^#, Vivek Jain, Dheeraj Gupta & Atul Babbar (2020) A Review Study on Miniaturization- A Boon or Curse,Advanced Manufacturing & Processing Technology, Edition 1, CRC Press, Taylor n Francis, pp. 1-21.ISBN: 97804298042.
2. Atul Babbar, Vivek Jain, Dheeraj Gupta, Chander Prakash,Ankit Sharma*^# (2020) Fabrication and Machining Methods of composites for Aerospace Applications,Characterization, Testing, Measurement, and Metrology, CRC Press, Taylor and Francis, pp. 1-16. ISBN-9780429298073.
3. Atul Babbar, Vivek Jain, Dheeraj Gupta, Chander Prakash, Sunpreet Singh, Ankit Sharma*^#(2020) Effect of process parameters on cutting forces and osteonecrosis for orthopedic bone drilling applications, CRC Press, Taylor and Francis, ISBN- 978-1-032-21042-1.
4. Atul Babbar, Vivek Jain, Dheeraj Gupta, &Ankit Sharma*^# (2020), Fabrication of Microchannels using Conventional and Hybrid Machining Processes, Non-Conventional Hybrid Machining Processes, CRC Press, Taylor and Francis, 1-15. ISBN- 9780429029165.
5. Ankit Sharma*^#, Vishwas Grover, Atul Babbar, Richa Rani (2020), A Trending Non-Conventional Hybrid Finishing/Machining Processes, Non-Conventional Hybrid Machining Processes, CRC Press, Taylor and Francis, 1-15. ISBN- 9780429029165.
6. Atul Babbar, Ankit Sharma*^#, Ranvijay Kumar, Pankaj Pundir, Vishal Dhiman (2021), Functionalized Biomaterials for 3D Printing: A Brief Review of the Literature, Advance Manufacturing with Functionalized Nanomaterials, Micro and Nano Technologies, Elsevier, pp. 87-107. ISBN- 978-0-12-823152-4.
7. Atul Babbar, Vivek Jain, Dheeraj Gupta, Ankit Sharma*^#, Chander Prakash, Vidyapati Kumar, Kapil Kumar Goyal, Additive Manufacturing for the Development of Biological Implants, Scaffolds, and Prosthetics, Additive manufacturing processes in Bio medical Engineering, CRC Press, Taylor and Francis, 1-20. ISBN- 9781003217961.
8. Vidyapati Kumar, Chander Prakash, Atul Babbar, Shubham Choudhary, Ankit Sharma*^#, Amrinder Singh Uppal,Additive Manufacturing in Biomedical Engineering, Present and Future Applications, Additive manufacturing processes in Biomedical Engineering, CRC Press, Taylor and Francis, 1-20. ISBN- 9781003217961.
9. Vidyapati Kumar, Atul Babbar, Ankit Sharma*^#, Ranvijay Kumar, Ankit Tyagi, Polymer 3D Bioprinting for Bionics and Tissue Engineering Applications, Advance Processing of Biodegradable Polymers for Tissue Engineering Applications, CRC Press, Taylor and Francis, 1-20. ISBN- 978-1-032-10973-2.
10. Atul Babbar, Yebing Tian, Vidyapati Kumar, Ankit Sharma*^#, 3D Bioprinting in Biomedical Applications, Advance Processing of Biodegradable Polymers for Tissue Engineering Applications, CRC Press, Taylor and Francis, 1-20. ISBN- 978-1-032-10973-2.
11. Vidyapati Kumar, Chander Prakash, Atul Babbar, Shubham Choudhary, Ankit Sharma*^#, Amrinder Singh, 3D Bioprinting in Biomedical Applications, Additive Manufacturing in Biomedical Engineering: Present and Future Applications, CRC Press, Taylor and Francis, 1-20. ISBN- 978-1-032-10973-2. *Corresponding author, ^#Equal contribution

Field of Specialisation

Manufacturing processes, Modern machining, Metrological instruments, Additive manufacturing processes

Training programs conducted

• Present and Future of Vibration assisted machining techniques: An Approach towards writing a research article, 14-06-2021 to 25-06-2021, Organized by CURIN, Chitkara University.

Awards:

Patents:

• PhD in Mechanical Engineering
• M.E in Thermal Engineering
• B.Techin Mechanical Engineering
• Diploma in Mechanical Engineering

Industry
1.5 years, Junior Engineer Trainee-Manufacturing of power generation devices such as Pressure vessel, Boiler & Heat exchangers, ISGEC Heavy Engineering Ltd, Haryana, India(2007 – 09).

Teaching
At various engineering colleges (2014 to 2023)