Immersive and Interactive Technology Lab (IITL)

Workshops/FDP’s Conducted

• Dr. Deeptipreet Kaur conducted a National Level Faculty Development Program on “Vision-Based Intelligent Systems: Design and Challenges”, at Chitkara University, Rajpura, in October 2020.
• Dr. Gurjinder Singh and Dr. Deeptipreet Kaur conducted a "Statistical Analysis Techniques in Education Research and Management", as a part of CUARS-2021 at Chitkara University, Rajpura from 14 June, 2021 to 2 July, 2021 in online mode.
• Dr. Amanpreet Kaur, Dr. K.R. Ramkumar and Dr. Sudesh Mittal conducted 15 days workshop titled as “Post Quantum Cryptography and Hardware Security” from 14-6-2021 to 2-7-2021 in Chitkara University Annual Research Symposium (CUARS 2021) at Chitkara University, Punjab.
• Dr. Amanpreet Kaur and Dr. Vidyotma Gandhi conducted one week online hands-on workshop on “Internet of Things (IoT): From Inception to Real Time Implementation” from 26-10-2020 to 30-10-2020 organized by Chitkara University, Punjab.
• Dr. Archana Mantri, Pro- Vice Chancellor, CURIN headed a 5 day hands-on workshop on “Virtual Reality” in collaboration with NITTTR, Chandigarh from 26-30 Nov 2018. The workshop was co-ordinated by Ms. Neha Tuli, Assistant Professor, CURIN (CSE). The experts for the sessions were from Augmented Reality/ Virtual Reality Lab; Ms. Amanpreet Kaur (Basics of Unity 3D software and User Interface Designing), Ms. Bhanu Sharma (3D Modelling and Animations), Mr. Gurwinder Singh (2D Game Development), Ms. Neha Tuli (Augmented Reality Application Development), Mr. Shivam Sharma (Virtual Reality Application Development). The participants were very inquisitive and developed the applications on their own.
• 3 days hands-on workshop from 19-20 Jan 2019 on “Augmented and Virtual Reality” was taken by the resource persons from AR/VR lab, CURIN. The experts for the session were Ms. Amanpreet Kaur (Basics of Unity 3D software), Ms. Bhanu Sharma (User Interface), Mr. Gurwinder Singh, Ms. Manisha, Mr. Harun (2D Game Development), Ms. Neha Tuli, Mr. Shivam Sharma (Augmented Reality Application Development). The workshop was organised by IEEE Student Chapter of Chitkara University Punjab.
• Faculty of AR/VR lab delivered 5 days hands-on workshop on AR/VR to students and faculty of UIET Kurukshetra University sponsored by AICTE Training and Learning (ATAL) academy from 9-13 Sept 2020. The experts for the session were Ms. Amanpreet Kaur (Basics of Unity 3D software), Ms. Bhanu Sharma (User Interface), Mr. Gurwinder Singh, Mr. Narinder Pal Singh (2D Game Development), Ms. Neha Tuli, Mr. Shivam Sharma (Augmented Reality Application Development). Each participant was able to develop his/her own 2D game, an Augmented Reality application and a Virtual Reality application by the end of the workshop.
• Dr. Deeptipreet Kaur is the Faculty In-charge and Resource person for National Level Faculty Development Program on “Internet of Things: A Hands-on approach using MKR1000” from 16-20 Dec 2019 at Chitkara University.The aim of the program was to make faculty members aware of the latest technological trends in the Internet of Things domain. Also, the sessions were completely hands-on so that each participant can learn and develop their application related to IoT. A total of 16 participants from different Engineering colleges participated in the program. Participants were introduced to the concept of designing and developing IoT applications from scratch.
• Augmented Reality/ Virtual Reality lab team members led by Dr. Archana Mantri, Vice Chancellor, #Chitkara University successfully delivered a 5 days online hands-on #Faculty #Development #Programme on AR/VR from 25th-29th May, 2020. There were approximately 180 faculty participants from all over India. The FDP was organised by #UIET #Kurukshetra University sponsored by #AICTE Training and Learning (ATAL) academy. Each participant was able to develop his/her own 2D game, an Augmented Reality application and a Virtual Reality application by the end of the workshop. The workshop was co-ordinated by Ms. Neha Tuli, Assistant Professor (Research). The experts for the 5 days session were Mrs. Bhanu Sharma, Mr. Narinder Pal Singh, Mrs. Amanpreet Kaur, Mrs. Shubham, Mr. Harun, Mr. Gurwinder, Manisha, Ms. Neha and Mr. Shivam.
• Dr. Archana Mantri, Mr. Partha Sarthy, Mr. Vineet and Mr. Narinder Pal Singh have attended the Unite India 2019 Developer conference from November 14–15, 2019 in Kochi, India. This conference explored the potential of AR and VR solutions, digital twins, and AI-powered simulations to accelerate innovation and deliver a competitive edge in the era of industry. Attendees discovered the latest developments in the field of games and VR/AR, upcoming Unity features, tools and received tips from Unity experts.
• Dr. K.R.Ramkumar, Dr. Amanpreet Kaur and Mr. Keshav from Chitkara University Research & Innovation Network (CURIN), Chitkara University, Punjab organized one day International workshop on Cyber Security and FPGA: The Future Technology on 7th July 2020. Workshop was attended by 70+ participants from national and international level. All the sessions were very interactive and informative.
• Augmented & Virtual Reality Lab of CURIN successfully conducted 5-days online hands-on Faculty Development Programme on "Disruptive Technologies: Augmented Reality and its Applications" from 13th-17th July, 2020. There were approximately 25 participants from national and international level. Each participant was able to develop his/her own 2D game and an Augmented Reality application as an outcome of the FDP. The Event was organised by Dr. Deepti Prit Kaur (Assistant Professor, CURIN) and Dr. Amanpreet Kaur (Research Associate, CURIN). The experts for the 5 days sessions were Dr. Amanpreet Kaur, Ms. Bhanu Sharma, Mr. Narinder Pal Singh, Ms. Shubham Gargrish, Mr. Gurwinder Singh, Ms. Neha Tuli, Mr. Shivam Sharma and Dr. Deepti Prit Kaur.
• CURIN successfully conducted 6-days online hands-on Faculty Development Programme on "Applied Artificial Intelligence in Engineering and Basic Sciences" from 10th August-15th August, 2020. The FDP sessions focussed on Introduction to Artificial Intelligence, Augmented/Virtual Reality with Artificial Intelligence, Machine Learning and Sensors, Microsoft Azure Machine learning Studio, Microsoft Azure Machine Learning - Data Modelling, Vehicular ad-hoc networks, Data Analysis using Python, Privacy preserving in Clouds through Homomorphic Encryption, Quantum Cryptography, Overleaf Session, Overleaf- Research Article Writing, Recent advances and application of Machine Learning of Super Capacitor and Solid State Material Science, Use of Statistics in Machine Learning Applications.There were approximately 30 participants from national and international level. The convener of the event was Dr. K.R. Ramkumar. The event was organised by Dr. Amanpreet Kaur, Dr. Partha Khanra and Ms.Soni. The experts for the 5 days sessions were Dr. K.R. Ramkumar, Dr. Vidyotma Gandhi, Dr. Amanpreet Kaur, Dr. Partha Khanra, Dr. Amandeep Kaur, Dr.Harjeet Singh, Ms.Soni Singh, Ms. Shabnam Choudhary, Ms.Tarandeep Kaur Bhatia, Ms.Vaishali Bhatia, Ms. Sonam Mittal and Ms. Neha Sharma.

Publication

• Kaur, D. P., & Mantri, A. (2020, December). Vision Tracking and Optical Character Recognition for Augmented Reality based Attendance System. In IOP Conference Series: Materials Science and Engineering (Vol. 993, No. 1, p. 012121). IOP Publishing.
• Gargrish, S., Kaur, D. P., Mantri, A., Singh, G., & Sharma, B. (2021). Measuring effectiveness of augmented reality‐based geometry learning assistant on memory retention abilities of the students in 3D geometry. Computer Applications in Engineering Education.
• Tuli, N., Mantri, A., Sharma, S., Singh, G., Gargrish, S., & Sharma, B. (2021, March). The learning approaches using Augmented Reality in learning environments: Meta-Analysis. In 2021 International Conference on Advance Computing and Innovative Technologies in Engineering (ICACITE) (pp. 871-875). IEEE.
• Gargrish, S., Sharma, B., Tuli, N., Mantri, A., & Modgil, A. (2021).Augmented Reality Applications in Education: Teachers Opinion. Available at SSRN 3833872.
• Singh, G., Mantri, A., Sharma, O., & Kaur, R. (2021). Virtual reality learning environment for enhancing electronics engineering laboratory experience. Computer Applications in Engineering Education.
• Dutta, R., Mantri, A., Singh, G., Malhotra, S., Kumar, A. (2020). Impact of Flipped Learning Approach on Students Motivation for Learning Digital Electronics Course. Integration of Education, 24(3),453–464. https://doi.org/10.15507/1991-9468.100.024.202003.453-464
• Singh, M., Singh, G., Gill, B., Bansal, I., & Kapoor, H. (2020, October). Enabling Online Education in Government Schools in India. In 2020 IEEE International Conference on Distributed Computing, VLSI, Electrical Circuits and Robotics (DISCOVER) (pp. 111-114). IEEE.
• Kumar, A., Mantri, A. (2021). Evaluating the attitude towards the intention to use ARITE system for improving laboratory skills by engineering educators. Education and Information Technologies; 1-30. https://doi.org/10.1007/s10639-020-10420-z
• A. Kumar and A. Mantri, "Gesture-Based Model of Mixed Reality Human-Computer Interface," 9th International Conference System Modeling and Advancement in Research Trends (SMART), 2020, pp. 226-230, https://doi.org/10.1109/SMART50582.2020.9337130.
• Tuli, N., & Mantri, A. (2021). Evaluating usability of mobile-based augmented reality learning environments for early childhood. International Journal of Human–Computer Interaction, 37(9), 815-827.
• Faridi, H., Tuli, N., Mantri, A., Singh, G., & Gargrish, S. (2021). A framework utilizing augmented reality to improve critical thinking ability and learning gain of the students in Physics. Computer Applications in Engineering Education, 29(1), 258-273.
• Tuli, N., & Mantri, A. (2020). Experience Fleming's rule in electromagnetism using augmented reality: analyzing impact on students' learning. Procedia Computer Science, 172, 660-668.
• Tuli, N., Mantri, A., Sharma, S., Singh, G., Gargrish, S., & Sharma, B. (2021, March). The learning approaches using Augmented Reality in learning environments: Meta-Analysis. In 2021 International Conference on Advance Computing and Innovative Technologies in Engineering (ICACITE) (pp. 871-875). IEEE.
• Singh, G., Tuli, N., & Mantri, A. (2021, March). Issues and Challenges in Learning Foundation Linear Algebra Course with Technology: A Literature Review. In 2021 International Conference on Advance Computing and Innovative Technologies in Engineering (ICACITE) (pp. 860-865). IEEE.
• Tuli, N., & Mantri, A. (2020). Usability principles for augmented reality based kindergarten applications. Procedia Computer Science, 172, 679-687.
• Keshav Kumar, Amanpreet Kaur and K.R. Ramkumar, “Effective Data Transmission with UART on Kintex-7 FPGA” in 8th IEEE International Conference on Computational Intelligence and Communication Networks (CICN), Nainital, 25-26 September, 2020.
• Sharma, B., Gargarish, S., Kaur, A. and Mantri A., “Effect of virtual reality-based pre-lab training simulator on students’ learning and skills in laboratory work: a comparative exploration” in National Conference on Advances in Applied Sciences and Mathematics (NCASM-20), 24-25 September, 2020.
• Kumar, K., Ramkumar, K.R. and Kaur, A., “A Design Implementation and Comparative Analysis of Advanced Encryption Standard (AES) Algorithm on FPGA” in 8th IEEE International Conference on Reliability, Infocom Technologies and Optimization (ICRITO'2020), 4-5 June 2020.
• Kumar, K., Ramkumar, K.R., Kaur, A. and Choudhary, S. “A Survey on Hardware Implementation of Cryptographic Algorithms Using Field Programmable Gate Array” in 8th IEEE International Conference on Communication Systems and Network Technologies (CSNT), 10-12 April 2020.
• Kumar, K., Ramkumar, K.R. and Kaur, A., “A Lightweight AES Algorithm Implementation for Encrypting Voice Messages using Field Programmable Gate Arrays”, Journal of King Saud University - Computer and Information Sciences, August 2020. Online Available @ URL: https://doi.org/10.1016/j.jksuci.2020.08.005
• Singh, G, Mantri, A, Sharma, O, Dutta, R, Kaur, R. Evaluating the Impact of Augmented Reality Learning Environment on Electronics Laboratory Skills of Engineering Students. Comput Appl Eng Educ. 2019; 27: 1361– 1375. https://doi.org/10.1002/cae.22156
• Manisha, A. Mantri (2019), “An Augmented Reality Application for Basic Mathematics: Teaching and Assessing Kids’ Learning Efficiency”, International Conference On Computing, Communication, Control And Automation (ICCUBEA), Pune, India, 19-21 November 2019.
• Sharma B., Mantri A., (2019, November), Assimilating Disruptive Technology: A New Approach of Learning Science Engineering Education. Procedia Computer Science.
• Kaur, D. P., Mantri, A., & Horan, B. (October 2019). Design implications for adaptive augmented reality based interactive learning environment for improved concept comprehension in engineering paradigms. Interactive Learning Environments, 1-19.
• Kaur, D. P., Mantri, A., & Horan, B. (November 2019). Enhancing Student Motivation with use of Augmented Reality for Interactive Learning in Engineering Education. Procedia Computer Science.
• Harun, Neha Tuli, Archana Mantri (2019), “Experience Fleming’s rule in Electromagnetism using Augmented Reality: To Analyze the impact on students learning. Procedia Computer Science.
• Harun, Bhanu Sharma, Archana Mantri (2019),” A Literature survey on Various Applications of Augmented Reality Emerging with Internet of Things”, Chitkara University Doctoral Consortium, 17-18 May 2019, Rajpura, Punjab, India.
• Tuli, N. & Mantri, A. (2019). Usability Principles for Augmented Reality based Kindergarten application. Procedia Computer Science.
• Gargrish. S. & Mantri. A. (2019), Measuring students’ motivation towards Virtual Reality game-like learning environments, 2020, Indo-Taiwan, International Conference on Computing, Analytics and Network.
• Gargrish. S., Mantri. A. & Kaur. D. (2020), Augmented Reality-Based Learning Environment to Enhance Teaching-Learning Experience in Geometry Education. Elsevier Procedia Computer Science.
• Kaur A., Kumar K., Gandhi V., Sandhu A., Pandey B. (2019), “Frequency Scaling based Power Efficient Current Source Design on FPGA”, International Journal of Engineering and Advanced Technology (IJEAT), ISSN: 2249 – 8958,Vol.9, Issue 2, December 2019, pp.1586-1590. Online Available @ URL: https://www.ijeat.org/wp-content/uploads/papers/v9i2/B2339129219.pdf
• Kaur A., Kumar V., Mantri A. (2019), “Design and Development of MEMS Sensors based Inertial Navigation Systems for Aerial Vehicles: A Case Study”, International Journal of Sensors,Wireless Communications and Control, Vol.9, April 2019, pp.1-10. DOI : 10.2174/2210327909666190409124143 Online Available @ URL: http://www.eurekaselect.com/node/171482/article/design-and-development-of-mems-sensors-based-inertial-navigation-systems-for-aerial-vehicles-a-case-study
• Kaur, A., Kumar, K., Sandhu, A., Kaur, A., Jain, A., & Pandey, B.(2019). Frequency Scaling Based Low Power ORIYA UNICODE READER (OUR) Design ON 40nm and 28nm FPGA. International Journal of Recent Technology and Engineering, March 2019. Online Available @ URL: https://www.ijrte.org/wp-content/uploads/papers/v7i6s/F04010376S19.pdf
• Gupta, S., Chaudhary, R., Gupta, S., Kaur, A., & Mantri, A. (2019, November). A Survey on Tracking Techniques in Augmented Reality based Application. In 2019 Fifth International Conference on Image Information Processing (ICIIP) (pp. 215-220). IEEE.
• Kumar K., Kaur A. (2019), “Energy Efficient UART Design Using Virtex-4, Virtex-5 and Virtex-6 FPGA”, Gyancity Journal of Electronics and Computer Science, Vol.4, No.1, pp. 8-13, March 2019. ISSN: 2446-2918 DOI: 10.21058/gjecs.2019.41002. Online Available @ URL: http://gjecs.gyancity.com/Vol4No1/GJECS_41002.pdf
• K. Kumar, K.R. Ramkumar and Kaur A.(2020). A Design Implementation and Comparative Analysis of Advanced Encryption Standard (AES) Algorithm on FPGA” In IEEE 8th INTERNATIONAL CONFERENCE on Reliability, Infocom Technologies and Optimization (ICRITO'2020).
• Kumar, K., Ramkumar, K. R., Kaur, A., & Choudhary, S. (2020, April). A Survey on Hardware Implementation of Cryptographic Algorithms Using Field Programmable Gate Array. In 2020 IEEE 9th International Conference on Communication Systems and Network Technologies (CSNT) (pp. 189-194). IEEE.
• Kumar, K., Kaur, A., Pandey,B and Panda,S.N. (2018, Nov), “Effect of Different Nano Meter Technology Based FPGA on Energy Efficient UART Design”, IEEE 8th International Conference on Communication Systems and Network Technologies (CSNT2018), RGVP, Bhopal, India, 24-26 November 2018. (Accepted)
• Kumar, K., Kaur, A., Pandey,B and Panda,S.N. (2018, Nov), “Low Power UART Design Using Different Nanometer Technology Based FPGA”, IEEE 8th International Conference on Communication Systems and Network Technologies (CSNT2018), RGVP, Bhopal, India, 24-26 November 2018. (Accepted)
• Kaur, A. (2018, Nov), “A Survey on FPGA Implementations in Embedded Augmented Reality Applications”, IEEE International Conference on Wireless Networks and Embedded Systems (WECON), 16-17 November 2018, Rajpura, Punjab, India. (Accepted)
• Kaushik,B., Anand,V., Yasmeen,K., Kaur,A. (2018, Nov), “Power Efficient Arithmetic and Logical Unit design on FPGA ”, IEEE International Conference on Wireless Networks and Embedded Systems (WECON), 16-17 November 2018, Rajpura, Punjab, India. (Accepted)
• D. Kaur, A. Mantri and B. Horan (2018, Oct.), " A Framework Utilizing Augmented Reality to Enhance the Teaching–Learning Experience of Linear Control Systems, IETE Journal of Research, DOI: 10.1080/03772063.2018.1532822
• Tuli, N., & Mantri, A. (2018, July). A Co-design Methodology to Design and Develop Serious Educational Games: Integrating the Actors and Challenges in Each Phase. In International Conference on Computing, Analytics and Networks (pp. 42-52). Springer, Singapore.
• Pandey, B., Pandey, N., Kaur,A., Hussain D.M.A., Das, B., Tomar, G.(2018, May), “Scaling of Output Load in Energy Efficient FIR Filter For Green on Ultra Scale FPGA”, Wireless Personal Communications, May 2018,Vol. 100, Issue.2, pp 1-14.Online Available @ URL: http://link.springer.com/article/10.1007/s11277-018-5717-2
• Sharma B., Mantri A., (March 2018)," Development of Science Learning Tool Using Virtual Reality, Augmented Reality & Mixed Reality " , , 12th NDIACOM and 5th IEEE International Conference on Computing for Sustainable Global Development, Bharati Vidyapeeth, Delhi, 14-16 March 2018.
• Sharma D., Sharma B., Sharma P., (March 2018)," An Empirical Study of 3D Modeling Software for Virtual/Augmented Reality”, , 12th NDIACOM and 5th IEEE International Conference on Computing for Sustainable Global Development, Bharati Vidyapeeth, Delhi, 14-16 March 2018.
• Kumar A., Kaur A., Sharma B., Mantri, A., (2018, March), “Gesture Based Human Computer Interaction Model for Mixed Reality System”, 12th NDIACOM and 5th IEEE International Conference on Computing for Sustainable Global Development, Bharati Vidyapeeth, Delhi, 14-16 March 2018.
• Anand,V., Kaur,A., Gupta,S. (2018, March), “LVCMOS IO Standard Based Energy Efficient SHARDA Unicode Reader Design on FPGA”, 12th NDIACOM and 5th IEEE International Conference on Computing for Sustainable Global Development, Bharati Vidyapeeth, Delhi, 14-16 March 2018.
• Gupta,G., Kaur A., Pandey,B. (2017, Dec.), “LVCMOS based Green Data Flip Flop Design on FPGA”, 9th International Conference on Advance Computing (ICoAC -2017), Chennai, India, 14-16 Dec.2017.
• Tuli, N., Gargrish, S., & Mantri, A. (2017, Dec.). Low-cost learning environment for grass-root education. In Humanitarian Technology Conference (R10-HTC), 2017 IEEE Region 10 (pp. 615-619). IEEE.
• Kaur A., Sharma B., Kumar A., Mantri A., (2017, Sept.) “Technical Aspects of Gesture Recognition Systems”, Adjunct Proceedings, Interact 2017, IIT Bombay, India, September 2017.
• Sharma B., Kaur A., Kumar A., Mantri A., (2017, Sept.) “Distinct Techniques of Gesture Recognition”, Adjunct Proceedings, Interact 2017, IIT Bombay, India, September 2017.
• Anand,V., Kaur,A.(2017, Sept.), “Implementation of Energy Efficient FIR Gaussian Filter on FPGA”, 4th International Conference on Signal Processing, Computing and Control (ISPCC 2017) Jaypee University of Information Technology, Waknaghat, India, 21-23 Sept.2017.
• Ramkumar K.R., Kaur, A.(2017, Sept.), “A Distributed method of Key issue and revocation of Mobile Ad hoc Networks using Curve Fitting”,4th International Conference on Signal Processing, Computing and Control (ISPCC 2017), Jaypee University of InformationTechnology, Waknaghat, India, 21-23 Sept.2017.
• Savita, Kaur, A., Sandhu,A., Gupta,I., Kaur,A., Dhingra, S.(2017, August), “Power Efficient Telugu Unicode Reader Design on FPGA”, Indian Journal of Science and Technology, August, 2017.Online Available @ URL: http://indjst.org/index.php/indjst/article/view/117370
• Pandey, B., Das, B., Kaur,A., Kumar,T., Hussain,D.M.A., Tomar,G. (2017,July), “Performance Evaluation of FIR Filter after Implementation on Different FPGA and SOC and Its Utilization in Communication and Network”, Wireless Personal Communications, July 2017, Vol. 95, Issue.2, pp 375-389.Online Available @ URL: http://link.springer.com/article/10.1007/s11277-016-3898-0
• Anand,V., Kaur,A.(2017, June.),, “Energy Efficient Unicode Reader Design on FPGA”, Indian Journal of Science and Technology, Vol 10 (22),June, 2017. Online Available @ URL: http://www.indjst.org/index.php/indjst/article/view/113510
  
  
• Kaur A., Mantri A.,(2017, May) “Design of Virtual Reality Based FPGA Teaching and Learning Aid for Engineering Students”, Chitkara University Doctoral Consortium, Chitkara university, Punjab, 13-May-2017.
• Kaur,A., Singh,S., Pandey,B., Pandey,N., Hussain,D.M.A. (2017, April), “Power Efficient Gurumukhi Unicode Reader Design and Implementation on FPGA” , IEEE 3rd International Conference on Electrical and Electronic Engineering, Telecommunication Engineering and Mechatronics, Beirut, Lebanon, 26-28 April 2017.
• Sharma,P., Kaur,A., Gupta,S. (2017, March), “Energy Efficient Meetei Mayek Unicode Reader Design ”, 11th NDIACOM and 4th IEEE International Conference on Computing for Sustainable Global Development, Bharati Vidyapeeth, Delhi, 1-3 March 2017.
• Kaur A., Balsundar P., Kumar V., Mantri A., Raj A.,(2016, Oct.) “MEMS based Inertial Navigation System: An Exploratory Analysis”, IEEE International Conference on Wireless Networks and Embedded Systems (WECON), 16-17 October 2016, Rajpura, Punjab, India.
• Pandey,N., Sharma,S., Chowdhary,B.S., Kaur,A., Dhankar,M. (2016, Sept.), “Implementation of Temperature Sensor for LVCMOS25 Using Virtex6 FPGA”, Gyancity Journal of Electronics and Computer Science Vol.1 No.1 September 2016, pp:7-13.Online Available @ URL: http://gjecs.gyancity.com/Vol1No1/Paper2.pdf
• Tomar,P., Gupta,S., Kaur,A., Dabbas,S., Hussain,D.M.A. (2016, Sept.), Low Power FPGA Based Solar Charge Sensor Design Using Frequency Scaling”, Gyancity Journal of Electronics and Computer Science Vol.1 No.1 September 2016, pp:27-30. Online Available @ URL: http://gjecs.gyancity.com/Vol1No1/Paper5.pdf
• Kaur, A., Singh,S.(2016, Jan.), “Clock Gating Based Low Power Efficient Universal Gurmukhi Unicoder Design on FPGA” , Gyancity Journal of Engineering and Technology Vol.2, No.1, January 2016,pp:59-66.Online Available @ URL: http://gjet.gyancity.com/Vol2No1/7.pdf
• Tuli N., Mantri A., (2016, Jan.), Interactive Faculty Display: Giving AR Experience, Journal of Engineering Education Transformations, Vol. 29, No. 3, January 2016, pp. 61-66.
• Kaur,H., Kaur, A., Sohal,H., Gupta,I., Singh,S., Nagpal,S. (2016, Jan.), “Design and Performance Analysis of RAM_WR_Control Module using Xilinx ISE 14.2”, Indian Journal of Science and Technology, Vol 9(46), 2016, pp.1-5. Online Available @ URL:http://indjst.org/index.php/indjst/article/view/106915/76089
• Singh G., Mantri A., (2015, Dec.), Ubiquitous Hybrid Tracking Techniques for Augmented Reality Applications, 1st International Conference on Recent Advances in Engineering and Computational Sciences, RACES- 2015, Dec. 21– 22, 2015, Panjab University, Chandigarh.
• Mantri A., (2015, Oct.)A Blended Learning Model to achieve academic excellence in preparing Post graduate engineering students to become university teachers, 3rd International Conference on MOOCs, Innovation and Technology in Education (MITE), pp. 9-14, Oct. 1-2, 2015, ACET, Amritsar.
• Kaur D., Mantri A. (2015, Oct.), Computer Vision and Sensor Fusion for efficient Hybrid Tacking in Augmented Reality Systems, 3rd International Conference on MOOCs, Innovation and Technology in Education (MITE), pp. 176-181, Oct. 1-2, 2015, ACET, Amritsar.
• Sharma,N., Kaur,A., Verma,B.(2015, Sept.), “Stub-Series Terminated Logic Based Energy Efficient Devnagri Unicode Reader Design on 40nm And 28nm FPGA” , IEEE International Conference on Next Generation Computing Technologies (NGCT), 4-5 September 2015, UPES, Dehradun, India.
• Kaur,A., Singh,A., Singh, S., Fazili, F., Minver,M., Sharma,V.(2015,July) “Capacitance Scaling Based Energy Efficient and Tera Hertz Design of Malayalam Unicode Reader on FPGA” , International Journal of u- and e- Service, Science and Technology Vol.8, No. 8 (2015), pp.151-158. Online Available @ URL:http://www.sersc.org/journals/IJUNESST/vol8_no8/15.pdf
• Mandhok, S., Pandey, B., Kaur, A., Minver,M., Hussain,D.M.A. (2015, July),“HSTL IO Standard Based Energy Efficient Multiplier Design using Nikhilam Navatashcaramam Dashatah on 28nm FPGA” International Journal of Control and Automation Vol.8, No.8 (2015), pp.35-44. Online Available @ URL: http://www.sersc.org/journals/IJCA/vol8_no8/5.pdf
• Kalia,K., Pandey,B., Nanda,K., Malhotra,S., Kaur,A., Hussain,D.M.A.(2015, July),“, “Pseudo Open Drain IO Standards Based Energy Efficient Solar Charge Sensor Design on 20nm FPGA”, 11th IEEE International Conference on Power Electronics and Drive Systems (PEDS 2015), Sydney, Australia, June 2015.
• Aggarwal, S., Verma, G., Kaur,A., Pandey,B., Singh,S., Kumar,R.(2015,April), “Green ECG Machine Design Using Different Logic Families”, IEEE International Conference on Communication Systems and Network Technologies (CSNT), Gwalior, India, April 4-6, 2015.
• Gupta,T., Verma,G., Kaur,A., Pandey,B., Singh,A., Kaur,T. (2015,April), “Energy Efficient Counter Design Using Voltage Scaling on FPGA”, IEEE International Conference on Communication Systems and Network Technologies (CSNT), Gwalior, India, April 4-6, 2015.
• Sharma B., Mantri A., (2015, March), Review of Graphical Rendering Software’s for Creating Virtual Content for AR Applications, 4th International Conference on Wireless Networking and Embedded Systems WECON 2015, March 20 – 21, 2015, Chitkara University, Punjab, India.
• Tuli N., Mantri A., (2015, March), Interaction Techniques: helping user manipulate AR virtual content, 4th International Conference on Wireless Networking and Embedded Systems WECON 2015, March 20 – 21, 2015, Chitkara University, Punjab, India.
• Kaur N., Mantri A., (2015, March), An overview of Display hardware for merging the virtual images with the view of the real world for augmented reality Applications, 4th International Conference on Wireless Networking and Embedded Systems WECON 2015, March 20 – 21, 2015, Chitkara University, Punjab, India.
• Kaur D., Mantri A., (2015, March), Comparative Analysis of Indoor and Outdoor Tracking Techniques for Augmented Reality Applications, 4th International Conference on Wireless Networking and Embedded Systems WECON 2015, March 20 – 21, 2015, Chitkara University, Punjab, India.
• Kaur,A., Singh,G., Pandey,B., Fazili,F. (2015,March), “Thermal Aware Green Gurumukhi Unicode Reader for Natural Language Processing”, 10th INDIACOM and 3rd IEEE International Conference on Computing for Sustainable Global Development, Bharati Vidyapeeth, Delhi, 11-13 March 2015.
• Madhok, S., Kaur, A., Pandey B. (2015,March), “Different IO Standard Based Energy Efficient Decoder Design For 64-bit Processor Architecture”, 10th INDIACOM and 3rd IEEE International Conference on Computing for Sustainable Global Development, Bharati Vidyapeeth, Delhi, 11-13 March 2015.
• Madhok, S., Kaur, A., Pandey B. (2015,March), “Different IO Standard Based Energy Efficient Decoder Design For 64-bit Processor Architecture”, 10th INDIACOM and 3rd IEEE International Conference on Computing for Sustainable Global Development, Bharati Vidyapeeth, Delhi, 11-13 March 2015.
• Kaur,A., Bhat,D., Singh,S. (2015, March), “Low Voltage Digitally Control Impedance Based Solar Charge Controller Design on FPGA”, 10th INDIACOM and 3rd IEEE International Conference on Computing for Sustainable Global Development, Bharati Vidyapeeth, Delhi, 11-13 March 2015.
• Kaur, A., Bhat, D., Singh,S. (2015, March), “Wireless Sensor Network Specific Low Power FIR Filter Design and Implementation on FPGA”, 10th INDIACOM and 3rd IEEE International Conference on Computing for Sustainable Global Development, Bharati Vidyapeeth, Delhi, 11-13 March 2015.
• Kaur,A., Pandey, B., Sharma,A., Sharma,K., Singh,S. (2015,Feb.), “SSTL IO Standard Based Tera Hertz & Energy Efficient MALAYALAM Unicode Reader Design and Implementation on FPGA”, Bilingual International Conference on Information Technology: Yesterday, Today, and Tomorrow at Defence Scientific Information & Documentation Centre (DESIDOC), DRDO, Ministry of Defence, Government of India during 19-21 February, 2015, In Special Edition of “Managing Information Technology”, Vol.6, No.48, February, 2015
• Kaur,A., Goswami,K., Singh,S., Pandey,B. (2015, Feb.),“Energy Efficient Gujrati Unicode Reader’s Development and Implementation on FPGA, “Bilingual International Conference on Information Technology: Yesterday, Today, and Tomorrow” at Defence Scientific Information & Documentation Centre (DESIDOC), DRDO, Ministry of Defence, Government of India during 19-21 February, 2015, In Special Edition of “Managing Information Technology”, Vol.6, No.48.
• Mantri A., Ahuja S., (2015, Jan.), Innovation Management in Young Academic Institutes, pp: 252-256, Journal of Engineering Education Transformations, Special Issue: Jan. 2015, eISSN 2394-1707, DOI:10.16920/ijerit/2015/v0i0/59728.
• Tuli N., Mantri A., (2015, Jan.), Augmented Reality Teaching Aid: Making Chemistry interactive, Journal of Engineering Education Transformations, Special Issue: Jan. 2015, pp 188- 191, eISSN 2394-1707, DOI:10.16920/ijerit/2015/v0i0/59624.
• Kaur,T., Kaur,A., Pandey,B.(2015,Jan.), “Thermal Aware Energy Efficient Content Addressable Memory Design on FPGA”, IEEE International Conference on Nascent Technologies in the Engineering (ICNTE), Fr. C. Rodrigues Institute of Technology, MUMBAI; January 09-10, 2015.
• Pandey,B., Kaur,A., Modgil,A., Singh,S., Garg,K. (2015, Jan.), “SSTL Based Energy Efficient ISCAS’99 Benchmark Circuit Design on FPGA”, International Journal of Energy, Information and Communications Vol.6, Issue 3 (2015), pp.39-46.Online Available @ URL: http://dx.doi.org/10.14257/ijeic.2015.6.3.05
• Singla,A., Kaur,A., Pandey,B. (2014,Dec.), “LVCMOS Based Energy Efficient Solar Charge Sensor Design on FPGA”, IEEE Sixth India International Conference on Power Electronics (IICPE), NIT Kurukshetra, 8-10 December, 2014.
• Singh, S., Kaur, A., Pandey,B. (2014, Dec.) “Energy Efficient Flip Flop Design Using Voltage Scaling On FPGA”, IEEE Sixth India International Conference on Power Electronics (IICPE), NIT Kurukshetra, 8-10 December, 2014.
• Bhat,D., Kaur,A., Pandey,B., Singla, A. (2014, Dec.), “Output Load Based Energy Efficient Solar Charge Sensor Design on 28nm FPGA”, International Conference on “Recent Advances and Trends In Electrical Engineering (RATEE)” on 23rd-24rd December, 2014 at NITTTR Chandigarh.
• Singh,S., Jain,A., Kaur,A., Pandey,B. (2014, Nov.), “Thermal Aware Low Power Universal Asynchronous Receiver Transmitter Design on FPGA”, IEEE 6th International Conference on Computational Intelligence and Communication Networks (CICN), Udaipur, 14-16 November, 2014.
• Kumar,T., Das,T., Pandey,B., Rahman,A., Kaur,A., Hussain,D.M.A. (2014,Oct.), "LVTTL Based Energy Efficient Watermark Generator Design and Implementation on FPGA", IEEE International Conference on ICT Convergence 2014, 22-24 October, Busan, Korea .
• Mantri A., (2014, Jan.), Working towards scalable model of Problem Based Learning instruction in Undergraduate Engineering Education, European Journal of Engineering Education, Vol 39, Issue 3, (for online reading, visit: http://dx.doi.org/10.1080/03043797.2013.858106).
• Mantri A., Chitkara M., (2013, Dec.), A faculty experience on evolving an engineering curriculum with project based learning as co-educational strategy, Dec 19-20, 2013, pp 108-117, Proceedings of IEEE conference on Information Management in Knowledge Economy, Chitkara University, Chandigarh, India.
• Marda V., Mantri A., (2013, Dec.), Operational excellence in Indian Higher Education: Renewed focus on roles of enablers, Dec 19-20, 2013, pp. 123-126, Proceedings of IEEE conference on Information Management in Knowledge Economy, Chitkara University, Chandigarh, India.
• Kaur,A., Malhotra,S. (2013,Dec.), “Social Networking and Applications using Fourth Generation(4G) Technology, IEEE International Conference on Communication and Computer Vision (ICCCV), 20-21 December 2013, Coimbatore.
• Mantri A., Dutt S., Gupta J.P., (2009, Feb.), Using PBL to deliver course in Digital Electronics, Advances in Engineering Education, Vol.1, No.4, pp. 1-17, 2009. (For online reading, visit:http://www.scribd.com/doc/130993321/Using-PBL-to-deliver-course-in-Digital-Electronics).
• Mantri A., Dutt S., Gupta J.P., (2008, Nov), Design and Evaluation of a PBL based Course in Analog Electronics, IEEE Transactions on Education, Vol.51, No.4, pp. 432-438, Nov 2008. (For online reading, visit: http://www.scribd.com/doc/130992611/Design-and-Evaluation-of-PBL-Based-Course-in-Analog-Electronics).
• Mantri A., (2008, Oct), Problem Based Learning (PBL) in Engineering Education in India: An urgently needed paradigm shift, Journal of Engineering and Technology Education, Vol.2, No.1, pp 21-25
• Mantri A., (2008, Oct), Problem Based Learning (PBL) in Engineering Education in India: An urgently needed paradigm shift, Journal of Engineering and Technology Education, Vol.2, No.1, pp 21-25.
• Mantri A., Dutt S., Gupta J.P.,(2008, April), Designing problems for problem-based learning course in Analog Electronics: Cognitive and pedagogical issues, Australasian Journal of Engineering Education, vol.14, no.2, pp 33-42, 2008. (For online reading, visit: http://www.engineersmedia.com.au/journals/aaee/abstracts_14_2.html).

Projects

AR/VR Innovations: From Dusk to Dawn

EDUCATION BASED INNOVATIONS

• Augmented Reality Learning Environment (ARLE) for Visualization of Control System Properties: It enhances spatial visualization of complicated engineering concepts leading to improved understanding and motivation for learners.

  

• Augmented Reality Learning Environment for Oscilloscope and Function Generator in Electronics Engineering Laboratories: The project aims to develop Augmented Reality Learning Environment (ARLE) for engineering students to operate oscilloscope and function generator in electronics engineering laboratories. ARLE is an active learning system and it will help the student in understanding the equipment.

  

• Augmented Reality based Instructional Design For K-12 Education: ARUID_12 is an Augmented Reality based Electronics and Electrical learning kit for k-12 students. This kit helps early graders to understand electronics/electrical basis components, concept and circuits in fun learning way.

  

• Augmented Reality based Learning Environment to Experience the Concept of Magnetism: An application for class 10th, 12th and engineering students for studying the topic from their science book giving visual understanding of the topic so that they can retain it better. It is both desktop and android mobile based application that will help students to know the behavior of magnetic field lines, electric current, and voltage and visualize the basic principle of DC motor and generator.

  

• EmbedAR: It aims to demonstrate the working of embedded system in augmented environment so that a learner can understand its working. The objective of the project is to measure the impact of cognitive load and improve learning gain and motivation of the learner in engineering education.

  

• Augmented Reality based Learning System and method for K-map Logic Design: The present system provides AR-based learning system and method for electronic circuits. The system includes: computing device having one or more processors.

  

• Geometry Learning Assistant (GLA): It is designed for teaching and learning 3D geometry to grade 12th students. GLA seeks to build an AR based system by using object modeling and experimental learning approach into learning application. The aim of the application is to assist students’ in their learning process on geometry by allowing the students to construct, verify, interact and visualize the 3D objects in the real environment.

  

• Augmented Reality and Virtual Reality Based Advanced Mathematical Toolkit for Undergraduate Student: AR and VR based visualization kit is developed to explain complex mathematical concepts such as Linear Algebra, Differential Calculus, Knot theory and Hyperspace geometry. Focus is on graduate and postgraduate students and converting the actual applied mathematics from computation to visualization part

  

• Learn -O- Little: It is an Augmented Reality based interactive learning kit for kindergarten kids to help them learn the alphabet and word building and practice various interactive quizzes. The AR application is a free complimentary app with the learning kit hardware which is compatible with both IOS and android.

  

• Self-Adaptive approach for iterative Gamification for Learning and Assessing Mathematics in Elementary School Education: The purpose of this research is to present a self-adaptive serious game to enhance the computational skills of students and to assess their learning through pre and post-test methods.

  

• Augmented Reality based Magic Book for Autistic Children (Jadoo): Augmented Reality (AR) based book (JADOO) allows for interaction with the real world which makes it easier to generalize real-life situations through digital content. The immersive, visual nature of AR capitalizes on a strength largely held by people with Autistic Spectrum Disorder (ASD) and produces more curiosity and engagement.

  

AVR Innovations: From Dusk to Dawn

TRAINING BASED INNOVATIONS

• Virtual Shooting Tutor with Hybrid Tracking: Mobile based Virtual Reality application is designed and developed to provide the initial level shooting training to troops for Defense Forces. Hybridization of external Micro Electro-Mechanical Systems (MEMS) based gyroscope with mobile integrated gyroscope is done in this application.

  

• Augmented Shooting Tutor with Hybrid Tracking: Mobile based Augmented Reality application is designed and developed to provide the initial level shooting training to troops for Defense Forces. Hybridization of sensor based tracking and vision based tracking is done in this application.

  

• Virtual Reality-Based Driving Test Simulator: VR based driving test simulator is developed for the test drives of cars. It is a complete tool to test the driving skills and judgment of an individual in the real-life road scenario by evaluating them in a simulated virtual reality based environment of a city and accompanied with daily-life challenges.

  

Intern

Patent Filed

• Patent Name-Smart Ksheer Processor
  Inventor Name-Deepti Prit Kaur, Priyanka Malhotra
  Status- Filed
  
  
• Patent Name-Smart food processor for producing milk based products
  Inventor Name-Deepti Prit Kaur, Priyanka Malhotra
  Status- Filed
  
  
• Patent Name-Table For Heavy Instruments
  Inventor Name-Gurjinder Singh, Nitin Kumar Saluja, Ayush Jain, Ashwani Singh, Jeevan Singh Dosad, Rouble Gupta, Varinder Singh
  Description-Table used for heavy and vibrating instruments used in laboratory
  Status- Filed
  Patent Image
  
• Patent Name-Smart Dock Station With Landline Phone
  Inventor NamePriya Jindal, Jasmine Kaur, Sandhir Sharma, Gurjinder Singh, Rashmi Aggarwal, Shivinder Nijjer
  DescriptionPatent of Landline phone with storage facility.
  Status Filed
  Patent Image
  
• Patent Name-System and Method For Augmented Reality Assisted Learning.
  Inventor Name-Amit Kumar, Archana Mantri, Shivani Malhotra, Rubina Dutta, Narinderpal Singh
  Description-The Proposed system is sed to teach students embedded system fundamentals using AR technology. The system visualizes the internal architecture of the microcontroller-based system and helps students to interact with different components of the microcontroller-based system. It provides a smooth transition of knowledge from hardware abstraction level to application level.
  Status- Filed
  Patent Image
  
• Patent Name-Alerting And Disinfecting Device
  Inventor Name-Neha Tuli, Shivam Sharma, Dr. Archana Mantri
  Description-The solution is a modern, minimal, simple and light-weight stylist accessory with beautiful and ergonomic design which is very durable. It can be used all day long everywhere, convenient for travelling, easy refill, reusable and eco friendly. Its full chamber provides more than 100 sprays.
  Status- Filed
  Patent Image
  
• Patent Name-Real Time Reflecting Device
  Inventor Name-Neha Tuli,Shivam Sharma,Gurpreet Singh,Gurwinder Singh,Archana Mantri,Narinder Pal Singh
  Description-This invention bounces an image of the student’s flashcard in the device’s camera. The application then processes this image and displays the respective model/animation of that alphabet. It uses a shielded reflector which only captures images in a closed area protecting the child’s privacy.
  Status- Filed
  Patent Image
  
• Patent Name-A Mounting Apparatus for a Fan to Reduce Risk of Disaster Due to Excess Load
  Inventor Name-Kumar, K.R.Ramkumar, Amanpreet Kaur
  Description-The present disclosure provides a mounting apparatus for a fan, which includes: a mounting element coupling the fan to a support structure such that the fan is at a predetermined height from a ground, the mounting element configured to move from a contracted state to an extended state on receipt of a first signal, wherein, when the mounting element moves to the extended state, the fan moves towards the ground; a sensor coupled to the mounting element and configured to detect a load acting on the mounting element; and a controller configured to generate the first signal when the load is greater than a threshold value, and the mounting element moves to the extended state leading to a relative decrease in the predetermined height. The threshold value is indicative of load placed on the mounting element in addition to weight of the fan.
  Status- Filed
  Patent Image
  
• Patent Name-Device To Track The Pregnancy on A Digital Calendar
  Inventor Name-Bhanu Sharma, Narinder Pal Singh, Shubham Gargarish, Naveen Kumar, Prabhnoor Bachhal, Archana Mantri, Amanpreet Kaur, Amandeep Kaur, Krishna Dutt Sharma
  Description-We proposed a mother care digital calendar that is the most advanced pregnancy assistant device. This device accompanies the mother in a 280 days great adventure. With the help of our digital calendar mothers will be able to follow the day to day development of their babies. Parents and family members are always curious to see the growth of the baby. We also proposed an augmented reality-based application for visualization purposes. The user just needs to scan the calendar marker to see the 3d visualization of the baby. With that, we will also provide an AR colored ultrasound video of the baby every week.
  Status- Filed
  Patent Image
  
• Patent Name-System for Detection, Tracking and Elimination of Locust Swarm
  Inventor NameNarinder Pal Singh, Bhanu Sharma, Amanpreet Kaur, Naveen Kumar, Archana Mantri, Shubham Gargarish, Tikka Prabhjot Singh
  Description-We proposed drone-based solutions to deal with locusts swarm problems as these are becoming more important in agriculture. Autonomous drones can be used to spray biopesticides for controlling locust. A drone having an intelligent vision system will recognize locusts swarm, mainly works in two ways, first, it will detect flying locusts swarm from any view, and second, it will also detect ground live locusts from the top view. A vision-based classification system for locusts will be implemented, that will detect the motion of the locust’s swarm, predict the flying swarm and the second one will detect the sitting swarm. Once the detection population is found above a threshold value, a decision will be made according to the scenario. Detection motion or grounded swarm triggers the drone to automatically localize the sensitive area. Once reaching the appropriate location an automatic spray system will start.
  Status- Filed
  Patent Image
  
• Patent Name-Disinfecting And Drying Apparatus For Clothes
  Inventor Name-Bhanu Sharma, Archana Mantri, Deepika, Shubham, Krishna Dutt Sharma
  Description-A clothes disinfecting apparatus for destroying the harmful microorganisms like bacteria, fungi or viruses from the clothes is disclosed. The disclosed apparatus includes a first cabinet adapted to accommodate and disinfect the clothes, and a second cabinet adapted to dry the disinfected clothes is positioned adjacent to the said cabinet . A container provided in the first cabinet for spraying one or more fluids on the accommodated clothes through a set of nozzles, and a drying unit operatively coupled in the second cabinet for drying the disinfected clothes. The apparatus includes a driving unit that facilitates in moving the clothes in between the first cabinet and the second cabinet.
  Status- Filed
  Patent Image
  
• Patent Name-Smart Dustbin
  Inventor Name-Bhanu Sharm, Archana Mantri, Ashwani Singh
  Description-For the proper management of school and household waste it is required to separate each type of waste. So, we have made a bin which separates the dry and wet waste and then blending the wet waste into manure inside the bin.
  Status- Filed
  Patent Image
  
• Patent Name-Electronic Equipment Visualization System and Method
  Inventor Name-Dr. Gurjinder Singh, Archana Mantri,Bhanu Sharma,Narinder Pal Singh,Rashpinder Kaur
  Description-The present disclosure relates generally to the field of digital learning. More particularly, the present disclosure provides an electronic equipment visualization system and method to help enhance conceptual clarity and 5 understanding of electronic equipment.
  Status- Filed
  Patent Image
  
• Patent Name-System And Method For Augmented Reality Assisted Learning
  Inventor Name-Amit Kumar, Shivani Malhotra, Ms Rubina Dutta, Archana Mantri, Narinder Pal Singh
  Status- Filed
  Patent Image
  
• Patent Name-Digital Learning System
  Inventor Name-Ms Rubina Dutta, Amit Kumar, Shivani Malhotra, Bhanu Sharma, Archana Mantri,Gurjinder Singh
  Description-During the COVID 19, most of the educational institutions are covering their theory subjects through Online mode but they failed to cover the lab-oriented subjects in which the hands-on approach is required. They provide video lectures for labs as well, due to lack of interaction students lose their interest and their practical knowledge suffers a lot. To overcome this problem, a digital learning system was designed where students can interact with the hardware components virtually and analyze the changes that happen in the real environment through the virtual world. The present system could help students to enhance their learning abilities by being far from the educational spaces. The only requirement is to share the API with the students. Teachers can teach them through Live sessions where students perform their own (virtual interactivity with hardware components) by following the instructions.
  Status- Filed
  Patent Image
  
• Patent Name-Aerial System For Extinguishing
  Inventor Name-Dr. Bhanu Sharma, Dr. Archana Mantri,Ashwani Singh, Shweta Lamba, Surya Naryan Panda
  Status- Filed
  Patent Image
  
• Patent Name-Monitoring System For Subject
  Inventor Name-Gurwinder Singh, Shivam Sharma,Neha Tuli, Archana Mantri
  Description-It provides cognitive behavioural therapy virtually to mental health patients at their homes with an electronic glove that monitors physiological signals. It is an affordable VR system that can run on any android or iOS phone thus no extra device is needed. Monitoring Hand-glove is provided for moderate to severe anxiety patients for therapy sessions. Monthly reports will be generated from servers so patients can keep track of their progression. This keeps the norm of social distancing and provide an opportunity for psychotherapists for work from home solution.
  Status- Filed
  Patent Image
  
• Patent Name-System And Method For Augmented Reality-Based Learning
  Inventor Name-Shubham Gargrish, Bhanu Sharma,Narinder Pal Singh, Deepti Preet Kaur Archana Mantri,
  Description-An augmented reality based system for providing mathematics and geometrical content in an interactive way, the system comprises a camera to capture images of objects, a wooden kit with graphs pasted on the kit, and four or more markers are placed on the graph, wherein shape is formed on the graph and can be controlled by moving the vectors in any direction.
  Status- Filed
  Patent Image
  
• Patent Name-System And Method For Facilitating Data Flow Through AR Simulated Nodes
  Inventor Name-Chander Partap, Manisha,Bhanu Sharma, Narinder Pal Singh
  Description-There is a need for an environment that teaches the basic principles of firefighting without endangering one’s life. So, we have designed a hardware-oriented marker tracking for AR firefighting simulation environment
  Status Filed
  Patent Image
  
• Patent Name- Augmented reality based learning system and method for K-maplogic design
  Inventor Name- Rubina Dutta, Amit Kumar, Shivani Malhotra, Bhanu Sharma, Archana Mantri
  Description-"The present system provides AR-based learning system and method for electronic circuits. The system includes:computing device having one or more processors and memory; and scanning unit to scan AR markers placed by users on predefined location and generate scanned images. The AR markers include data of electronic circuits. The computing device is configured to display the electronic circuits on display unit to allow users to implement the displayed electronic circuits on hardware circuit kit. The hardware circuit kit generates output data based on the implementation. The computing device compares the generated output data with predefined output data that is stored in a database, and generates first data as either correct or incorrect based on the comparison of the generated output data and the predefined output data."
  Status- Filed
  Patent Image
  
• Patent Name- FOGMINATOR
  Inventor Name- Harun, Nikhil Sharma, Amrinder Singh, ApoorwaHaldiyan, NiteshParmar
  Description-Imagine you are driving a car in a foggy day and you cannot see beyond the limit of 3 metres (about 10 feet). This might have happened many a time, even though the vehicle is luxurious enough. Fog and smog may reduce visibility to zero, making driving extremely dangerous, which result in the multiple crashes on the National Highways. Therefore, causing suffering to the nation. According to the facts, in India, over 10,000 lives are compromised due to a fog-related road crashes over the span of five years. and this problem is increasing severely. The global road safety body International Road Federation urged with the Indian government to use fog lights and make them mandatory to all the vehicles. Furthermore, the use of fog lights can reduce the risk crash only by 30%, which is still less. Moreover, the reaction time is crucial because whenever an obstacle comes instantly in the front of the vehicle during fog, the driver does not have sufficient time to apply the brakes. So we are providing with an integrated solution for the above problem
  Status- Filed
  Patent Image
  
• Patent Name- Augmented Reality Based Learning Kit For Basic Electronics Course
  Inventor Name-Bhanu Sharma, Dr Archana Mantri, Narinder Pal Singh
  Description-Learning electronics in K-12 Education
  Status- Filed
  Patent Image
  
• Patent Name- System For Auto Filling of Water Bottles Lying in Refrigerator
  Inventor Name- Vikas,Vedant Kumar, Bhanu Sharma
  Description-The present invention relates generally to the field of Mechanical Engineering. More specifically the present invention is directed towards a unique system for auto filling of water bottles lying in refrigerator.
  Status- Filed
  Patent Image
  
• Patent Name-System and method to assess and accredit response to augmented reality (AR)
  Inventor Name-Chander Partap Singh, Manisha
  Description-There is a need for an environment that teaches the basic principles of firefighting without endangering one’s life. So, we have designed a hardware-oriented marker tracking for AR firefighting simulation environment.
  Status- Filed
  
• Patent Name-System and method for facilitating data flow through AR simulated nodes
  Inventor Name-Chander Partap Singh, Manisha, Bhanu Sharma, Narinder Pal Singh
  Description- We have proposed a system that can effectively let students to interact and practically learn the concept via real time interaction with the routers and switches.
  Status- Filed

• Patent Name-A novel device for Learning English using AR Technology
  Inventor Name-Ms. Neha Tuli, Mr. Shivam Sharma, Mr. Narinder Singh, Dr. Archana Mantri
  
  Description-It is an Augmented Reality based interactive learning kit for kindergarten kids to help them learn the alphabet and word building and practice various interactive quizzes. The AR application is a free complimentary app with the learning kit hardware which is compatible with both IOS and android. With the proposed application, learning is extended from 2 dimensions to 3 dimensions, which allows kids to learn more, quicker and better through animated 3D objects/characters. It is an all-round learning kit providing what advancing preschool children need, with visual effects, audio pronunciations and engaging interactions. The kit is designed in a way that the kids can carry around and learn anytime, anywhere. The proposed kit would help kids to have a better understanding in the pronunciation and memorization of the alphabet. It would increase their interest and motivation. The interactive AR environment with a friendlier interface would immerse kids in an environment of learning.
  Status- Filed
  Patent Image
  
• Patent Name-Convertible spoon cum fork
  Inventor Name-Ms. Neha Tuli, Mr. Shivam Sharma, Mr. Chanpreet Singh
  Description-It is design patent in which we propose a spoon design which can be converted into fork easily.
  Status- Filed
  
• Patent Name- A Medical Device for Early Detection of Hearing Loss in Infants
  Inventor Name-Mr. Shivam Sharma, Ms. Neha Tuli, Dr. Archana Mantri, Dr. Sachin Ahuja
  Description-Dhwani-VR is medical device for early detection of hearing loss in infants. It is an intelligent low-cost hearing loss screening device. It uses virtual reality (VR) as a medium to perform early diagnosis of hearing loss on a user. The in-built decision support feature of Dhwani-VR gives 95% accurate result so that hearing loss can be treated at earliest. Dhwani-VR is completely software-based that can convert any VR headset into a vision screening system. It has following features: Our device acts as a screening device and works on the principle of 'Doppler Effect’ along with Virtual Reality(VR). The VR headset will be worn by the child for the evaluation in a completely immersive environment. The application will use 3D audio(varying frequencies) for sending different sounds from multiple sources to detect the hearing capability of a child. This will be accompanied by interactive visuals to engage and comfort the child. The evaluation of hearing ability will be done based upon the reactions of the child to the various sounds(the frequencies/sounds can be controlled externally). This test is a low cost, faster and more efficient way to assess the hearing loss in children than any other solutions present today.
  Status- Filed
  Patent Image
  
• Patent Name-Virtual Reality-Based Driving Test Simulator
  Inventor Name-Mr. Shivam Sharma, Ms. Neha Tuli, Dr. Archana Mantri, Mr. Narinder
  Description-We have developed a VR(Virtual Reality)-based Driving Test Simulator. Our simulator addresses the authenticity problem as it includes a fingerprint scanner, which will be used for biometric Aadhaar verification. It consists of a VR headset, where the android phone running our application will be placed. It also includes a custom made steering wheel and pedals(accelerate and brake) for interaction in the VR environment. The fingerprint scanner will be used as a login medium for the driving test. Once logged in, the user will be placed in car in a Virtual 3D city environment, where the user will drive the car around the city and will encounter real-life challenges, traffic signs and traffic lights. Evaluation will be conducted on the basis of user’s response to the challenges and the user’s efficiency to follow traffic rules and regulations.
  Status- Filed
  
• Patent Name-Augmented Reality based Zone Simulation Apparatus
  Inventor Name-Mr. Ravinder, Mr. Shivam Sharma, Mr. Gurwinder, Mr. Narinder Singh, Ms. Neha Tuli
  Status- Filed
  
• Patent Name-Energy Efficient Unicode Reader Design on FPGA
  Inventor Name-Bishwajeet Pandey, Amanpreet Kaur
  Description-In the present invention, the inventors have integrated the expertise of electronics researcher and natural language processing researcher in order to develop faster, low cost, low power and secure hardware based Unicode reader design for 22 languages of eighth schedule of constitution of India. In order to make the processing faster, core electronics techniques like clock dedicated route, directed routing, area group compression, mapping, finite state machine, controlling skew, jitter and delay for high performance Unicode reader design are used. In order to make them energy efficient, core electronics techniques like clock gating, capacitance scaling, voltage scaling, thermal scaling, IO standard, impedance matching, mobile DDR I/O standard, HSTL I/O Standard, DCI, SSTL and LVCMOS for energy efficient Unicode reader design are being used.
  Status- Published
  
• Patent Name-Vision Based Augmented Reality System for Student Attendance Inventor
  Inventor Name-Deeptipreet Kaur, Archana Mantri
  Status- Filed
  
• Patent Name-Augmented Reality Based Training System
  Inventor Name-Amanpreet Kaur, Archana Mantri, Narinder Pal Singh
  Description-: An augmented reality based training system comprises a targeting unit embedded with at least one optical marker; emulating headset comprising a set of sensors to sense one or more attributes of the at least one optical marker. A processing unit to determine position of the targeting unit with respect to the emulating headset by selecting a first set of attributes from the sensed one or more attributes, wherein the first set of attributes is associated with position parameters of the targeting unit. Determine orientation of the targeting unit with respect to horizontal plane and vertical plane by selecting a second set of attributes from the sensed one or more attributes, wherein the second set of attributes is associated with orientation parameters of the targeting unit, responsive to triggering of the targeting unit at the determined position and orientation of the targeting unit, determine position of the target that gets hit.
  Status- Published
  
• Patent Name-AR based Interactive Medical Bench (IMB) for Healthcare Assistance
  Inventor Name-Amanpreet Kaur, Archana Mantri, K.R.Ramkumar
  Description-The present disclosure relates to augmented reality (AR) based interactive medical table assembly includes a set of markers imprinted on a top surface of the medical table, wherein each of the set of markers is associated with at least one disease. One or more cameras for capturing one or more images of at least one of the set of markers and an AR engine operatively coupled with the one or more cameras. The AR engine comprising one or more processors coupled to a memory, wherein the memory storing instructions executed by the one or more processors to extract one or more attributes from the captured one or more images, compare the extracted one or more attributes with a set of predefined features stored in a database, and generate one or more signals pertaining to information associated with the at least one disease based on the comparison.
  

  Status- Filed
  

  Patent Image
  

• Patent Name-System, Flying Device and Method for Dispersing Seed Balls in a region of interest
  Inventor Name-K.R.Ramkumar, Amanpreet Kaur
  Description-We propose a smart & intelligent fully automatic driven Seed Dispersal Unit (SDU) with the concept of seed ball and gluten coated seeds to disperse the seeds in the remote forests and inaccessible areas to re grow the forests and to be used in agriculture activities. The proposed design is a fully automatic and intelligent Seed Dispersal Unit that can detect the suitable areas to disperse the seeds, wherein, the seeds are covered by the seed balls. The seed balls are the seeds that have been wrapped in soil materials, usually a mixture of clay and compost, and then dried. Essentially, the seed is 'pre-planted' and can be sown by depositing the seed ball anywhere suitable for the species, keeping the seed safely until the proper germination window arises.
  

  Status- Filed
  

  Patent Image
  

• Patent Name-“Augmented Reality Based Geometry Based Learning Assistant”
  Inventor Name-Shubham Gargrish, Bhanu Sharma, Narinder Pal Singh, Deepti Prit Kaur, Archana Mantri
  Description-An augmented reality based system for providing mathematics and geometrical content in an interactive way, the system comprises a camera to capture images of objects, a wooden kit with graphs pasted on the kit, and four or more markers are placed on the graph, wherein shape is formed on the graph and can be controlled by moving the vectors in any direction
  

  Status- Filed
  

• Patent Name-Handheld Controller for Augmented Reality Based Shooting Tutor
  Inventor Name-Amanpreet Kaur, Archana Mantri, Narinder Pal Singh
  Description-The handheld controller is developed for shooting in Augmented Reality based shooting tutor (AST) with hybrid tracking. Marker based vision tracking is used to track the position of virtual gun. In order to track the rotation of virtual gun, BNO055 9 DOF absolute orientation is used.
  Status- Filed
  Patent Image
  
• Patent Name-Handheld controller for Virtual Reality Based Shooting Tutor
  Inventor Name-Amanpreet Kaur, Archana Mantri, Narinder Pal Singh
  Description-The handheld controller is developed for shooting in Virtual Reality based Shooting Tutor (VST) with hybrid tracking. AGILE methodology is used for prototyping of handheld controller in second version of VST. Continuous iterations of development and testing are practiced concurrently throughout for the improvements in prototype of handheld controller. Hybridization of two same types of tracking techniques with different form factor is done in this design. Mobile integrated gyroscope is hybridized with external MEMS gyroscope (from MPU6050) to provide the rotation to virtual gun with the help of handheld controller.
  Status- Filed
  Patent Image
  

Patent Granted

• Patent Name-Convertible spoon cum fork
  Inventor Name-Dr. Neha Tuli, Chanpreet Singh and Shivam Sharma
  Description-The invention is a dual fork convertible spoon that initially looks like a spoon. It has a cut-out portion that can be slid out, converting it into a spoon. Therefore, a single utensil can work as two. It would be a small, compact and a low cost product.
  Status- Granted
  Patent Image
  
• Patent Name-Handheld controller for Virtual Reality Based Shooting Tutor
  Inventor Name-Amanpreet Kaur, Archana Mantri, Narinder Pal Singh
  Description-The handheld controller is developed for shooting in Virtual Reality based Shooting Tutor (VST) with hybrid tracking. AGILE methodology is used for prototyping of handheld controller in second version of VST. Continuous iterations of development and testing are practiced concurrently throughout for the improvements in prototype of handheld controller. Hybridization of two same types of tracking techniques with different form factor is done in this design. Mobile integrated gyroscope is hybridized with external MEMS gyroscope (from MPU6050) to provide the rotation to virtual gun with the help of handheld controller.
  Status- Granted
  Patent Image
  
• Patent Name-Augmented Reality Based Training System
  Inventor Name-Amanpreet Kaur, Archana Mantri, Narinder Pal Singh
  Description-An augmented reality based training system comprises a targeting unit embedded with at least one optical marker; emulating headset comprising a set of sensors to sense one or more attributes of the at least one optical marker. A processing unit to determine position of the targeting unit with respect to the emulating headset by selecting a first set of attributes from the sensed one or more attributes, wherein the first set of attributes is associated with position parameters of the targeting unit. Determine orientation of the targeting unit with respect to horizontal plane and vertical plane by selecting a second set of attributes from the sensed one or more attributes, wherein the second set of attributes is associated with orientation parameters of the targeting unit, responsive to triggering of the targeting unit at the determined position and orientation of the targeting unit, determine position of the target that gets hit.
  Status- Granted
  Patent Image